E-Rick Shaw and E-Cart (L3)
Reliable. Cost-effective.
Features
- Lucas TVS Motor & Controllers are ICAT approved and used by 50+ Customer all over India, Currently around 1500 – 2000Nos supplied per month.
- High torque & High Performance motor with rare earth magnet design.
- Unique rotor design which avoids magnet fly off (IPM design – Interior permanent magnet design)
- Circumferential IPM design helps in achieving high efficiency (>90% @ Rated Condition) and high quality Ndfeb magnet used inside the motor which can withstand upto temperature of 150 degree Celsius.
- IP 67 protection against dust & water which will be suitable for Indian Monsoon conditions.
- High temperature Teflon / XLPE sleeves are used in wiring harness temperature withstanding capability of 120 degree Celsius.
- 24 MOSFET/TUBE controller.
- Controller is provided with regenerative braking features with EBS – electronic braking system enabled high range can be attained.
- Controller is also provided with Motor direction- reversing feature according to axle direction needed (Clockwise or anticlockwise).
- Controllers are IP 54 Rating.
- High efficiency during climbing, and better acceleration
- Work with multiple voltages: 48V min and 60V max with the same controller
- Auto Direction Switch
- Three Speed Switch
- Centre Locking -Anti theft
- Support Forward and Reverse Control
- Over Current Protection
- Over Voltage Protection
- Under voltage protection
Specification
| S. NO. | VARIANT/ CONFIGURATION |
VOTAGE (V) | NO LOAD SPEED (rpm) | RATED TORQUE (Nm) | RATED SPEED (rpm) | RATED POWER (kW) | NEAR STALL TORQUE (Nm) |
| 1 | 408 | 48 | 3000 ± 10% | 3.6 | 2700 ± 10% | 1.0 | 22.6 @ 250 rpm |
| 2 | 457 | 48 | 3300 ± 10% | 3.6 | 3000 ± 10% | 1.0 | 23.1 @ 270 rpm |
| 3 | 458 | 48 | 3000 ± 10% | 4.0 | 2500 ± 10% | 1.0 | 24.2 @290 rpm |
| 4 | 507 | 48 | 3000 ± 10% | 4.5 | 2700 ± 10% | 1.2 | 23.7 @ 510 rpm |
| 5 | 546 | 48 | 3300 ± 10% | 4.0 | 2800 ± 10% | 1.2 | 23.8 @ 540 rpm |
| 6 | 605 | 48 | 3400 ± 10% | 3.6 | 3200 ± 10% | 1.2 | 23.2 @ 450 rpm |
| 7 | 605 | 48 | 3400 ± 10% | 5.0 | 3000 ± 10% | 1.5 | 23.2 @ 450 rpm |
| 8 | 606 | 48 | 3000 ± 10% | 4.5 | 2600 ± 10% | 1.2 | 23.6 @550 rpm |
| 9 | 606 | 48 | 3000 ± 10% | 5.5 | 2400 ± 10% | 1.5 | 23.6 @550 rpm |
| 10 | 607 | 60 | 3000 ± 10% | 4.0 | 2700 ± 10% | 1.2 | 26 @ 630 rpm |
