Mid Drive Motor / Frame Mounted Motor / Swing Arm Mounted Motor
Reliable. Cost-effective.
Features
- Light weight and small dimension compare to hub motor
- High performance benefit from flux weakening
- High efficiency during climbing, and better acceleration
- High combined efficiency in operating zone >90%
- Long working life (>20,000 hours)
- Low noise, high torque
- Excellent performance characteristics
- Regenerative braking
- Work with multiple voltages: 36V min and 56V max with the same controller
- CAN Communication
- Report failures by CAN message
- Motor phase self detection and calibration
- Support Forward and Reverse Control
- Over Current Protection
- Over Voltage Protection
- Under voltage protection
Specification
| VARIANT-1 | VARIANT-2 | |
| Motor Type | PMSM IPM Motor With encoder | PMSM IPM Motor With encoder |
| Rated Power | 3000W (continuous) | 3000W (continuous) |
| Peak Power | 5500W for 60 seconds | 5500W for 60 seconds |
| Rated Voltage | 48V | 72V |
| Speed: Rate RPM | 4000 | 2000 |
| Peak RPM | 7000 | 3000 |
| Peak RPM with flux weakening | 7000 | 3000 |
| Max Torque | 20-22N.m peak. | 40Nm |
| Max Efficiency | >90% | |
| Continuous Current | 70A | 50A |
| Peak Current | 150A | 100A |
| Working Temperature( ℃ ) | -20ºC to 55ºC | -20ºC to 55ºC |
| Peak temperature ( ℃) | ||
| Waterproof Grade |
IP67 – Motor – Motor IP65 – Controller |
IP67 – Motor – Motor IP65 – Controller |
| Cooling | Forced Air Cool with external fan | Forced Air Cool with external fan |
| Dimension (Diameter X Length) | Refer outline drawing | Refer outline drawing |
| Weight approx ( kg ) |
Motor 7kg (approx) Controller 1.5kg |
Motor 8kg (approx) Controller 1.5kg |
Exploded View
