ABS Motor
Product Specification
- Frame size : Ø76mm
- System voltage : 12 V and 24V
- Torque : 60 Ncm
- Power : 420 Watts
- Weight : 0.9 Kg
- Life : 20,000 ABS-actuations
- 20,000 Vehicle starts
- 4 Pole permanent magnet type
- 2 brush system
- It operates a pump which in turn controls
- The wheel speed while braking.
Applications
- Medium Duty Trucks
Features
- Permanent Magnet 4 pole ,2 brush Motor with a special winding configuration
- Housed with Special seal using liquid sealing to meet IP69 protection class
- 240 hours of salt spray protection 20000 ABS actuations
Customer Benefits
- Low cost
- Lighter in weight
- Can be customized to meet customer requirements
Typical Performance Curve
Electric Power Steering Motor
Product Specification
- Supply Voltage : 12V
- Rated Torque : 1.1 Nm
- Rotation : Bi-Directional
- Current @1.1Nm : 20-25 A
- Speed @1.1Nm : 850 rpm (min)
- Stall Current : 40 A
- Stall Torque : 2.0 Nm
- Temperature : -40° C to + 85° C
Customer Benefits
- Ease of steering
- Less vibration
- Less noise
Features
- Bi-directional rotation
- Low cogging torque
- Less noise
- Less vibration
- High power
- Compact size
Applications
- Light commercial vehicles, SUV
Typical Performance Curve
Compressor Motor for Air Suspension
Features
- Frame Size : 76.5 mm
- System Voltage : 12.0 Volts
- Power : 384 Watts
- Mass : 2.2Kgs
- 2 Pole permanent magnet type Motor
- Motor drives the reciprocating air pump with twin piston technology
Customer Benefits
- Lighter in weight
- Low cost
- Customized design to customer specification
Product Specification
- Frame size : Ø 50mm
- Voltage : 24V
- Output : 150A
- Mass : 8.2 kg
- Range : 120 ~ 150A
- Operating Temp : -30°C to +100°C
Applications
- Luxury Cars like Audi, Tesla, Porsche
Typical Performance Curve
Roller Shutter Motor
Shutter Operation
- Forward: Motor Pin 1 – (+ve supply) and pin 4 (-ve) supply – Motor will rotate in counter clockwise when viewed output shaft end . Forward direction -Shutter to open
- Reverse: Motor Pin 1 – (- ve supply) and pin 4 (+ve) supply – Motor will rotate in clockwise
when viewed output shaft end . Reverse direction -Shutter to close
Product Specification
- 14SW60,12Volt 30 Nm DC motor
- 6 Nm operating torque
- Speed :55± 3 rpm (Revised 52 ± 3 rpm)
- Operating current :8 amps Max (Revised 9 A Max)
Motor & Sensor Circuit Diagram
